All Ribbon Coils ship with a Medium spring installed, as well as a Light and Firm springs in the package. Extra Light and Extra Firm springs are available here, as well as extra springs at all other weights.
35mm Air Spring Seal Kit
Air Spring Seal Kit for MRP 35mm forks.
35mm Damper Seal Kit
Damper Seal Kit for MRP 35mm forks
Stage and Loop Brake Cable Clamp
Brake hose clamp and bolt for the Stage and Loop forks.
Wiper Seal Press Tools
Use for easy installation of wiper seals during a service.
The QtapeR15 axle fits all Loop, Stage, and Baxter (15mm) model forks. This part is the axle only and does not include the captured axle nut. The Ribbon QR axle fits all Ribbon and Bartlett models and includes the nut.
MRP Tooled Axles for MRP front suspension forks. The 15x110mm tooled axle is for all MRP Ribbon, Ribbon SL, Raven, and Bartlett forks. The 12mm tooled axle is specific to the MRP Baxter v2 (2021-Present) and works for both boost 12x110 and non-boost 12x100 Baxter v2 forks.
The 15x110mm tooled axle includes the axle and axle nut. The 12mm tooled axle is just the 12mm axle.
Used for all knobs found on MRP forks.
35mm Brake Hose Clamp (Ribbon, Bartlett, Raven)
Brake hose clamp and bolt for the MRP Ribbon (Air, Coil, and SL), Bartlett, and Raven forks.
Ribbon Coil Conversion Kit
This kit provides the parts necessary to convert your Ribbon air to coil. *Must purchase the spring separately,click here for springs.
Replacement bolt for the bottom of all MRP single crown forks (excluding the Rustler). Includes pre-installed o-rings. Damper screw also works for Ribbon Coil Ramp Control adjuster. Please note, this is one single bolt, not a pair.
Ramp Dust Cap
Dust Cap for MRP forks using FulFill spring with Ramp Control (Ribbon, Loop TR, Stage, and Bartlett) and Ramp Control Cartridge.
All decal color options for the MRP Stage. If you are looking for other colors, our MRP Ribbon Decals will also fit the MRP Stage.
Rebound Bolt Removal Tool
Use this tool to easily remove the rebound bolt without allowing air to enter the damper.
Stage Wiper Seal Kit
Fits all MRP Stage forks
Includes: instructions, wiper seals, foam rings, o-rings, and stanchion grease
Damper Install Tool
For installing MRP fork dampers during service. Includes 32mm, 34mm, and 35mm damper tools.
FulFill™ Spring Conversion for Fox 36
Convert your 2015-2017 Fox 36 from a self-equalizing to an independent positive/negative chamber layout! This gives you additional control of the initial stroke and allows you to tune suppleness.
Compatible w/ 2015-2017 26/27.5/29 Fox 36 forks in all travels w/ Float Air Spring.
Not compatible with 2018 and new models.
Not compatible with Talas models.
32mm Wiper Seal Kit
Fits all Loop (SL,TR, and older), Rustler, and Baxter forks. Sold as a pair.