Lift Damper Upgrade Kit for Fox and Marzocchi Forks
Lift Damper Upgrade Kit for Fox and Marzocchi Forks
Lift Damper Upgrade Kit for Fox and Marzocchi Forks
Lift Damper Upgrade Kit for Fox and Marzocchi Forks

Lift Damper Upgrade Kit for Fox and Marzocchi Forks

Raise your confidence and your fork’s performance with a Lift Damper upgrade. Lift Damper cartridges are easy to install and provide an immediate performance upgrade. There are five tunes offered for the Lift, matching rider weights from 110-270 lbs. Weight-specific shim-stacks provide riders with perfectly matched damping and full usability of the external rebound and compression adjustment ranges. Valving has been optimized to deliver a seamless crossover from the low to high-speed circuits and provide a predictable and responsive terrain-hugging ride. Flow-path optimization and advanced needle shaping have minimized fluid turbulence, yielding quiet operation and superior sensitivity. Through a careful reduction in dynamic seals and by utilizing the latest bushing material from industry-leader IGUS, stiction has been virtually eliminated. Lift Dampers turn good forks into great forks. 

Regular price$399.95
/
Shipping calculated at checkout.
Model
Tune

Compatibility

  • NEW 34mm - Fox 34 (2021+), NON-STEPCAST MODELS ONLY. 140mm MAX TRAVEL
  • 36mm - Fox 36 (2018+), Marzocchi Z1 (36mm version, 2019+). 170mm MAX TRAVEL, 29" ONLY.
  • 38mm - Fox 38 (2021+). 180mm MAX TRAVEL

Lift Damper Parts and Tools

  • Cartridge format provides simple installation – no specialty tools needed.  
  • Five rider weight-based tunes: White (110-150 lbs.), Yellow (140-180 lbs.), Green (170-210 lbs.), Blue (200-240 lbs.), and Red (230-270 lbs).  
  • 12-clicks of external low-speed compression and rebound adjustability.  
  • Extremely low-friction IGUS “E” main bushing.  
  • 200 hr. service interval, user serviceable. 

COMPRESSION ASSEMBLY

Lift features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment. Lift gets you dialed-in quickly.

LOW-FRICTION SEALHEAD

Lift utilizes the latest low-friction bushing material from industry-leader Igus. Lift also features just a single major dynamic seal. These are just two of the reasons Lift is distinctly smooth.

CARTRIDGE FORMAT

Lift Dampers are ready-to-go, drop-in performance upgrades. Installation and service require no specialty tools, and the service interval is a massive 200 hours of ride time.

INSTALLATION INSTRUCTIONS

FIVE AVAILABLE TUNES

White (110-150 lbs. / 50-68 kgs.), Yellow (140-180 lbs. / 64-82 kgs.), Green (170-210 lbs. / 77-95 kgs.), Blue (200-240 lbs. / 91 -109 kgs.), and Red (230-270 lbs. / 105-123 kgs.). Shown with compression adjustment fully open.

ISOLATED CONTROL

Lift's seamless crossover from low to high-speed damping means the external low-speed compression adjustment can be set anywhere in range and have little to no effect on high-speed damping.

SUPPLE AND SUPPORTED

Compared to competitors' dampers, Lift displays remarkably low baseline damping at low-speeds and increases damping with greater speed-sensitivity.

INSTALLATION

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Andrew W
Excellent upgrade

I was about to give up and sell my Fox 36 grip 2. However, I saw this damper and decided to pull the trigger as I really wanted to love the fork and saw good reviews. On the first ride, I was able to get it dialed in where I could never with the grip 2. I love the simplicity of only two adjustments and the Tunes by weight range. I’m sure the grip 2 is great if you get it dialed, but I unfortunately don’t get to ride that often so it’s important I don’t have to spend all my time messing with knobs when I get to. Find myself loving my fork the way I should now. Thanks for fixing my fork MRP!

F
Fernando Pereira
This turned my "OK" fork into a top performer

My basic Fox 38 Grip had good initial stroke sensitivity but lacked a lot of mid-travel support and blowed through its travel way too easily, leading to harsh landings on rough drops and rocky sections. The MRP Lift damper absolutely solved all the issues I had with the original damper. The green tune is absolutely spot on for my weight/riding style. The support is absolutely perfect, it just uses the travel it really needs without packing. The adjustment range is more than enough and each click is noticeable. Installing was a breeze, the instructions were clear and easy to follow. This was absolutely worth the money, it turned my 38 into a top-performing fork. It's just a shame it was impossible to get this in Europe, there was no support at all from the distributors. So I had to buy directly from MRP and pay the hefty importing fees.

J
Jason Cass
Awesome Upgrade

I installed the Lift damper in my Fox Performance 38 and it transformed the fork. It’s very smooth and supportive now.

B
Brendan Hehir

Easy to fit, if you’ve ever done basic maintenance on your fork. Turned my Grip2 Fox 38 from an unsupportive yet harsh fork into a smooth fork that is an absolute joy to descend on. Highly recommended if you’re an XL sized rider compared to the stock fork.

S
S.P.
Fox 36

Best upgrade what have ever done! Lift give me more speed and control and confidence. I think this is the best suspension upgrade what you can do to your fox or rock shox fork.


Recently viewed