Product photo of the MRP Hazzard coil shock in orange

Designed for:

All-Mountain / Enduro

Just like Hazzard is most rider’s favorite section of Moab’s Whole Enchilada trail, the Hazzard shock may just be the favorite part of your bike. It delivers grin-inducing performance that remains consistent, top to bottom. And, the Shred Lever™ firms things up so you can head back up for more.

The Hazzard is the new go-to for riders who won’t compromise on performance or control. The Hazzard gives you all the benefits of coil-sprung suspension (supple action, lower friction, longer service life, and more consistency) and control over both high and low-speed compression damping, rebound, and spring preload. If that weren’t enough, the Hazzard features a convenient low-speed compression switch that firms up the shock immensely for sustained climbs and stage transfers - where saving energy is paramount. Plus, with our new Progressive Springs, you can use the Hazzard on bikes that previously required air shocks!


Product Options:

Sold out

MRP shocks are sold without spring or hardware, which are specific to rider and bike. To calculate your appropriate spring rate, please use our calculator here. Hazzard shocks are natively compatible with our lightweight Enduro SL and Progressive springs, and adaptable for use with our standard steel springs with Spacer Kit B. All shocks are built to order & usually shipped 6-10 days from order.



"The Hazzard is definitely an apex predator in the shock kingdom, able to devour every rock, root and braking bump in sight. That shiny orange climb switch is just camouflage, luring unsuspecting trails into complacency before the Hazzard strikes."

"As a whole, we are very impressed by the beating the MRP Hazzard Coil was able to take. I think this is the most well rounded, burley yet tunable rear coil shock we have tested, and that includes just about all of the options."


  Specs:

Adjustments: Precisely-indexed control of rebound, low-speed compression, and high-speed compression damping.

Options: Available in standard and metric sizing (with traditional eyelet, bearing (8x30mm), and trunnion mounts) and with either an anodized orange or black main body.

Spring Compatibility: Natively compatible with our lightweight Enduro SL and Progressive springs. Adaptable for use with our standard steel springs with our "Spacer Kit B".

Weight: 867g (230x60 with 500 lb. Enduro SL spring)

  Features:

  • Developed specifically for the needs of all-mountain and enduro riders.
  • Features the Shred Lever™ which when engaged reroutes oil through an additional shimmed flow path to greatly boost low-speed compression damping. Say goodbye to energy-sapping suspension movement when you’re hoofing it up steep routes to access rad descents!
  • Can be paired with MRP’s lightweight Enduro SL springs or Progressive Springs, which increase in spring rate late in stroke to provide additional ramp-up and bottom-out control. These springs can be used with bikes featuring linear or modestly progressive leverage curves that traditionally needed air shocks.
  • Large 14mm diameter shaft and reinforced eyelet joint for better durability with frames utilizing Clevis mounting and/or linkage yokes.
  • Includes seven additional decals in various colors for matching to bike.

Common Fit Database

  • Transition
  • Santa Cruz
  • Yeti

Patrol
Shock size: 205x65 (trunnion)
Hardware: Top N/A, bottom 25x8
Spring suggestion: Linear spring fine. Progressive spring an option for riders seeking more bottom-out resistance without resorting to more high-speed compression damping and/or compromising on sag.

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - N/A
65 kg / 145 lbs. - SL: 300, Progressive 300+
70 kg / 155 lbs - SL: 300, Progressive 300+
75 kg / 165 lbs. - SL: 350, Progressive 350+
80 kg / 175 lbs. - SL: 350, Progressive 350+
85 kg / 190 lbs. - SL: 375, Progressive 400+
90 kg / 200 lbs. - SL: 400, Progressive 400+
95 kg / 210 lbs. - SL: 400, Progressive 400+
100 kg / 220 lbs. - SL: 425, Progressive 450+

Sentinel (V1)
Shock size: 205x57.5 (trunnion)
Hardware: Top N/A, bottom 25x8
Spring suggestion: Progressive recommended.

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - Progressive 300+
65 kg / 145 lbs. - Progressive 300+
70 kg / 155 lbs. - Progressive 350+
75 kg / 165 lbs. - Progressive 350+
80 kg / 175 lbs. - Progressive 400+
85 kg / 190 lbs. - Progressive 400+
90 kg / 200 lbs. - Progressive 450+
95 kg / 210 lbs.- Progressive 450+
100 kg / 220 lbs. - Progressive 500+

Tallboy
Hazzard does not fit, unfortunately. The tunnel through the seat tube is too tight.

Hightower
Hazzard does not fit, unfortunately. The tunnel through the seat tube is too tight.

Megatower
Shock size: 230x57.5
Hardware: Front 20x8, Rear 30x8 (bearing compatible)
Spring suggestion: Linear spring fine. Progressive spring an option for riders seeking more bottom-out resistance without resorting to more high-speed compression damping and/or compromising on sag.

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - SL: 300, Progressive 300+
65 kg / 145 lbs. - SL: 350, Progressive 350+
70 kg / 155 lbs. - SL: 375, Progressive 400+
75 kg / 165 lbs. - SL: 400, Progressive 400+
80 kg / 175 lbs. - SL: 425, Progressive 450+
85 kg / 190 lbs. - SL: 450, Progressive 450+
90 kg / 200 lbs. - SL: 500, Progressive 500+
95 kg / 210 lbs. - SL: 500, Progressive 550+
100 kg / 220 lbs. - SL: 550, Progressive 550+

Bronson
Shock size: 210x55
Hardware: Front 20x8, Rear 30x8 (bearing compatible)
Spring suggestion: Progressive recommended. All Progressive spring options up-to 500+ are compatible with the Hazzard in this shock size, however the 550+ and 600+ springs are too long to be used.

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - Progressive 350+
65 kg / 145 lbs. - Progressive 350+
70 kg / 155 lbs. - Progressive 400+
75 kg / 165 lbs. - Progressive 400+
80 kg / 175 lbs. - Progressive 450+
85 kg / 190 lbs. - Progressive 450+
90 kg / 200 lbs. - Progressive 500+
95 kg / 210 lbs. - INCOMPATIBLE
100 kg / 220 lbs. - INCOMPATIBLE

Nomad
Shock size: 230x60
Hardware: Front 20x8, rear 30x8 (bearing compatible)
Spring suggestion: Linear spring fine. Progressive spring is overkill for most riders (suspension becomes too progressive).

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - SL: 300
65 kg / 145 lbs. - SL: 350
70 kg / 155 lbs. - SL: 375
75 kg / 165 lbs. - SL: 400
80 kg / 175 lbs. - SL: 425
85 kg / 190 lbs. - SL: 450
90 kg / 200 lbs. - SL: 450
95 kg / 210 lbs. - SL: 500
100 kg / 220 lbs.- SL: 500

SB165
Shock size: 230x65
Hardware: Front appears to be 36x8 (unverified, but other Yetis use this size), rear none (eyelet rotate 90º, requires spacer)
Spring suggestion: Linear spring fine. Progressive spring is overkill for most riders (suspension becomes too progressive).

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - N/A
65 kg / 145 lbs. - SL: 300
70 kg / 155 lbs. - SL: 300
75 kg / 165 lbs. - SL: 350
80 kg / 175 lbs - SL: 350
85 kg / 190 lbs. - SL: 375
90 kg / 200 lbs. - SL: 400
95 kg / 210 lbs. - SL: 425
100 kg / 220 lbs. - SL: 450

SB150
Shock size: 230x60
Hardware: Front 36x8, rear none (eyelet rotate 90º, requires spacer)
Spring suggestion: Linear spring fine. Progressive spring an option for riders seeking more bottom-out resistance without resorting to more high-speed compression damping and/or compromising on sag.

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - SL: 300, Progressive 300+
65 kg / 145 lbs. - SL: 300, Progressive 300+
70 kg / 155 lbs. - SL: 300, Progressive 350+
75 kg / 165 lbs. - SL: 350, Progressive 350+
80 kg / 175 lbs - SL: 375, Progressive 400+
85 kg / 190 lbs. - SL: 400, Progressive 400+
90 kg / 200 lbs. - SL: 425, Progressive 450+
95 kg / 210 lbs.- SL: 450, Progressive 450+
100 kg / 220 lbs. - SL: 475, Progressive 500+

SB130
Shock size: 210x52.5. 210x55 optional, Yeti market’s this as the “Lunch Ride” version of the bike and it boosts rear travel to 138mm.
Hardware: Front appears to be 36x8 (unverified), rear none (eyelet rotate 90º, requires spacer)
Spring suggestion: Progressive recommended. All Progressive spring options up-to 500+ are compatible with the Hazzard in this shock size, however the 550+ and 600+ springs are too long to be used.

Recommended Rates (weight, 30% sag):
60 kg / 130 lbs. - SL: 300, Progressive 300+
65 kg / 145 lbs. . - SL: 300, Progressive 350+
70 kg / 155 lbs. - SL: 300, Progressive 350+
75 kg / 165 lbs. - SL: 350, Progressive 350+
80 kg / 175 lbs - SL: 375, Progressive 400+
85 kg / 190 lbs. - SL: 400, Progressive 400+
90 kg / 200 lbs. - SL: 425, Progressive 450+
95 kg / 210 lbs. - SL: 450, Progressive 450+
100 kg / 220 lbs. - SL: 475, Progressive 500+

Decal Colors