For installing MRP fork dampers during service. Includes 32mm, 34mm, and 35mm damper tools.
Damper Bleed Cup
This is used for bleeding the damper on all MRP Suspension. You will also want to get the Valve Tool for the best bleed on your damper.
Valve Handle Tool
Use this tool with the MRP Bleed tool to turn the magnetic valve during the bleed process.
Rod Bolts (damper and spring side)
Replacement bolt for the bottom of all MRP single crown forks (excluding the Rustler). Includes pre-installed o-rings. Damper screw also works for Ribbon Coil Ramp Control adjuster. Please note, this is one single bolt, not a pair.
Replacement compression knobs for all MRP forks.
The Loop SL and Loop TR knobs are interchangeable to add adjustment range or simplify the range.
Ramp Dust Cap
Dust Cap for MRP forks using FulFill spring with Ramp Control (Ribbon, Loop TR, Stage, and Bartlett) and Ramp Control Cartridge.
FulFill Ramp Lock Nut
Ramp Control Lock Nut for MRP forks with FulFill air-springs and Ramp Control and Ramp Control Cartridge.
Shrader Valve Cap
Replacement cap for MRP fork shrader valves.
Top Out Bumper
Rear Shock Hardware
Shock hardware for MRP rear shocks. This is for one eyelet. If you do not have a trunnion shock, you will need to purchase the appropriate hardware for both eyelets.
2mm x 1mm O-Ring
Replacement o-rings for all Ribbon models.
Replacement Huck Pucks for the Ramp Control Pro, Ribbon SL and Bartlett forks.
"Ready to Shred" Package
2.5mm Hazzard Stroke Limiter
2.5mm Stroke Limiter for Hazzard - Clip-on spacer for limiting shock stroke by 2.5mm on Hazzard shocks. Commonly used for reducing 210x55 shocks for the 210x52.5 application or 230x60 shocks to the 230x57.5 application (other uses exist). Stacking spacers is not recommended.
Foam Rings - 35mm Forks
Replacement foam rings for all Ribbon and Bartlett fork models. Sold individually.
Ribbon SL & Raven Dust Cap
Aluminum dust cap for the Ribbon SL and Raven fork models.
MRP Orange Ramp Knob Dial
Orange Ramp Knob Dial for Ribbon Air and MRP Ramp Control Cartridges.
5.0mm Stroke Limiter for Hazzard
5.0mm Stroke Limiter for Hazzard - Clip-on spacer for limiting shock stroke by 5.0mm on Hazzard shocks. Commonly used for reducing 210x55 shocks for the 210x50 application or 230x65 shocks to the 230x60 application (other uses exist). Stacking spacers is not recommended.