High Performance Pedal Kit includes black Power Grips straps attached to a pair of high performance, lightweight, all metal pedals. Power Grips provide a hands-free, easy exit way to increased power for all levels of mountain bike, road and recumbent riders. No special shoes required. Weight: Approx. 350 grams/pair, including straps. Pedal Specifications: Aluminum alloy body & cage, Sealed cartridge bearings, Precision ground chromoly spindle, Low profile platform. Includes our micro-adjust bracket which easily adjusts to fit different shoe sizes with a standard 4mm Allen wrench. Only available in 9/16 pedal.
ALSO AVAILABLE WITH XL STRAPS
**Extra Long straps recommended if the circumference of your shoe around the widest part of your foot is more than 13 inches. Usually this pertains to size 12 and above, but is very dependent on the type of shoes or boots used. PEDAL REFLECTORS RECOMMENDED AND ARE AVAILABLE IN SPARE PARTS
The straps hold the foot really good
You can use them with any shoes you want, even with shoes with wide toe box (barefoot shoes)
In my case I needed to use XL straps since my size didn't fit in regular strap (11 US barefoot Altra sneakers)
The only thing I would like to change is to have possibility to move them a bit outside of the pedals closer to the back wheel in order to place the front part of the foot on the pedal, and not the middle part
Lyriks MY2021 and earlier work well with the Noken free-riding at Windrock! I added a 180mm airspring + Noken at 95psi, rebound 5 clicks from 'rabbit' and 6 clicks compression from open. I weigh #190 kitted. The Lyrik handled braking bumps WAY better. It stayed supportive for launches. I compare this to a fairly "chattery" previous setup of 170mm + 3 tokens at 80psi. I will see how the current setup performs at Snowshoe's back-country. Check back with me in 3 weeks!
I purchased alloy Kreitler rollers approximately 40 years ago brand new. I have used the rollers extensively through out those years. Occasional I have had to replace the drive belt. In April 2025 I noticed rear drum was a little loose. Upon further investigation in found that the roller axle had broken. I contacted MRP and spoke with Jason. Jason was very knowledgeable about my problem. Within a week I had my roller running with a new axle and bearings. Even after 40 years of use all drums still are running very smooth. Definitely a quality product that will last me a lifetime.
I upgraded to the Lift V2 and Ramp Control for 2022 Fox 38 Factory and cannot believe the difference. This was my 2nd fork with the Grip2 Damper, never could get it dialed in, I was considering the X2 Damper, glad I passed on it. . Literally, I was able to got it dialed in on my 1st ride with the Lift V2! I have been riding with it for over a month now, I am riding faster with more confidence on my Ripmo V2S than before. If you are considering the upgrade,, I highly encourage you to go for it and add the Ramp Control at the same time. So sweet to be able to adjust the ramp up from my local trails to the big mountain riding in the Sierras! Thanks MRP for a great product!
I went from a 4.5" roller I had been running for 15 years, it needed replacement. The one I chose to buy is the 3" version of Kompact, about a third more resistance due to the reduced roller diameter. It is indeed a significantly greater pedaling load, but the 4.5" rollers were getting too easy and I would have needed a greater load.
I work to support domestic manufacturing and smaller business. and Kreitler has been a defacto reference for rollers for decades.
No worries, fast shipping, sweet quality and great Customer Support. Very pleased.
100% increase in front tire contact pressure feel. Plush support for rough steeps. This damper@160/150 SDS+ megneg is excellent on the FuelEXe XT. Thanks for making us all ride better damped saferer really